Laser Cutter

From Knox Makers Wiki
Jump to: navigation, search
(Buildlog.net Interface Board)
(Buildlog.net Interface Board)
Line 100: Line 100:
 
|TB8||1||Terminal block 5mm x 3|| ||
 
|TB8||1||Terminal block 5mm x 3|| ||
 
|-
 
|-
|U1||1||Power Supply 5V DC/DC||Murata OKI-78SR-5/1.5-W36-C||
+
|U1||1||Power Supply 5V DC/DC||Murata OKI-78SR-5/1.5-W36-C|| Mouser || 580-OKI78SR5/1.5W36C
 
|-
 
|-
|U2||1||Power Supply 3.3V DC/DC||Microchip MCP1700-3302E/TO||
+
|U2||1||Power Supply 3.3V DC/DC||Microchip MCP1700-3302E/TO|| Mouser || 579-MCP1700-3302E/TO
 
|-
 
|-
 
|U3,U4,U5||3||Stepper Driver||Pololu A4983 or A4988||
 
|U3,U4,U5||3||Stepper Driver||Pololu A4983 or A4988||
Line 108: Line 108:
 
|U6||1||Schmitt Trigger Non-Inverting||NXP 74HC7014||
 
|U6||1||Schmitt Trigger Non-Inverting||NXP 74HC7014||
 
|-
 
|-
|B1||1||50mm Blower, 5V||Sunon KDE0505PFV1.11.MS.A.GN||
+
|B1||1||50mm Blower, 5V||Sunon KDE0505PFV1.11.MS.A.GN|| Digikey || 259-1576-ND
 
|-
 
|-
 
|Terminal Block Plug ||3||4C For stepper motors|| ||
 
|Terminal Block Plug ||3||4C For stepper motors|| ||

Revision as of 00:54, 12 November 2012

Personal tools