Prusa Mendel
From Knox Makers Wiki
(Difference between revisions)
Andronicus (Talk | contribs) (Created page with "==Setup== ===Hardware=== * Printed Parts https://github.com/josefprusa/PrusaMendel/tree/master/metric-prusa-lm8uu * RAMPS http://reprap.org/wiki/RAMPS_1.4 ===Firmware=== * Marli...") |
Andronicus (Talk | contribs) |
||
| Line 3: | Line 3: | ||
* Printed Parts https://github.com/josefprusa/PrusaMendel/tree/master/metric-prusa-lm8uu | * Printed Parts https://github.com/josefprusa/PrusaMendel/tree/master/metric-prusa-lm8uu | ||
* RAMPS http://reprap.org/wiki/RAMPS_1.4 | * RAMPS http://reprap.org/wiki/RAMPS_1.4 | ||
| + | |||
| + | ====Hot-End==== | ||
| + | *J Head Mk IV-B http://reprap.org/wiki/J_Head_Nozzle | ||
| + | |||
| + | ====Heated Bed==== | ||
| + | |||
| + | ====Temperature Sensors==== | ||
| + | * Hot-End: Thermistor 100K B57560G104F http://ultimachine.com/content/thermistor-100k http://reprap.org/wiki/Thermistor#EPCOS_100K_Thermistor_.28B57560G1104F.29 | ||
| + | * Heated Bed: Thermistor 100K B57560G104F | ||
===Firmware=== | ===Firmware=== | ||
Revision as of 16:40, 21 October 2012
Contents |
Setup
Hardware
- Printed Parts https://github.com/josefprusa/PrusaMendel/tree/master/metric-prusa-lm8uu
- RAMPS http://reprap.org/wiki/RAMPS_1.4
Hot-End
- J Head Mk IV-B http://reprap.org/wiki/J_Head_Nozzle
Heated Bed
Temperature Sensors
- Hot-End: Thermistor 100K B57560G104F http://ultimachine.com/content/thermistor-100k http://reprap.org/wiki/Thermistor#EPCOS_100K_Thermistor_.28B57560G1104F.29
- Heated Bed: Thermistor 100K B57560G104F
Firmware
Software
- Printrun https://github.com/kliment/Printrun
- Slic3r http://slic3r.org/
- OpenSCAD http://www.openscad.org/
