Member Meeting

PID Controls

December 15th was our member meeting for the month.  I gave a talk on PID controls with an live demonstration of temperature control using a relay-activated light bulb for heating and an RC motor with propeller used for cooling.  There was lots of audience participation with many great questions asked.

First, I'd like to thank the folks that showed up.  PID controls can be a pretty esoteric subject, but there was a lot of interest from the folks in attendance.  An interested audience always makes you feel better when giving a presentation.   

Second, there were a few questions from those who attended about where to read more on this topic.  For those who can read boring text and work your way through it, I'd recommend Control Guru as a place to read up and learn more in depth about PID controls.  He starts with a great general description of controls problems, then digs into individual aspects of it in great detail.  A good site to learn the basic concepts and get a hint of how to work some of the inner details.  If anyone is interested in the excel tool that I was using to illustrate the controls response numerically, it can be found here.

For the specifics on the live demo, I basically combined three non-standard arduino libraries.  I used the PID Library to calculate the control output using the proportional, integral, and derivative tuning parameters and the temperature input.  For the input, I was using a standard Type K thermocouple.  I used the MAX6675 breakout board available from adafruit.  It uses serial communications (SPI) to pass temperature information to the arduino.  The adafruit provides details on how to set up the board and links to a library they've developed to work with the board.  Finally, my output was a servo output given to the electronic speed controller (ESC) and motor I took from an RC plane.  I used the servo library to handle the servo communications.  I had to read up on the specifics of using my  ESC to make sure I allowed time for arming, etc.

The pseudo code is basically:


Subscribe to RSS - Member Meeting